3 EME Centre, Bhopal Overview
3 EME Centre, Bhopal is a technical training establishment located in Bairagarh, on the north-western side of Bhopal, Madhya Pradesh. It is listed as a centre-level institute with private ownership and offers diploma-level engineering programmes approved by the All India Council for Technical Education (AICTE). The institute is not UGC approved.
The centre offers four diploma-level entries in the Engineering stream: Diploma in Design and Drafting Technology, Diploma in Machine Tool Technology, Diploma in Wood Technology and a generic After 10th Diploma category. The three named specialisations are three-year full-time programmes with an intake of 75 seats each, taking the total listed intake to 225 seats. Admission is entrance-based, and candidates must appear for the prescribed entrance examination before securing a seat.
Because this is a specialised technical centre rather than a conventional multi-stream college, applicants should confirm the current admission notification, fee structure and counselling route directly with the institute before applying. Details that are not available in the reference information are flagged as such in the sections below.
3 EME Centre, Bhopal Key Highlights
| Particulars | Details |
|---|---|
| Institute | 3 EME Centre, Bhopal |
| Institute type | Centre |
| Ownership | Private |
| City | Bhopal |
| State | Madhya Pradesh |
| Full address | 3 EME CENTRE, BAIRAGARH, BHOPAL |
| Streams | Engineering |
| Courses offered | Diploma in Design and Drafting Technology, Diploma in Machine Tool Technology, Diploma in Wood Technology, After 10th Diploma |
| Total seats (listed programmes) | 225 |
| Approvals & recognition | AICTE |
| UGC approved | No |
| Listing ID | 156981 |
Courses Offered at 3 EME Centre, Bhopal
The centre lists four diploma-level entries in the Engineering stream. Three are named specialisations of three years' duration with 75 seats each; the fourth is the generic After 10th Diploma category under which these programmes are grouped. AICTE recognition is recorded against the three named specialisations. Fee details for all programmes are not available in the provided data.
| Course | Duration | Seats | Recognition | Fees (total) |
|---|---|---|---|---|
| Diploma in Design and Drafting Technology | 3 years | 75 | AICTE | Not available |
| Diploma in Machine Tool Technology | 3 years | 75 | AICTE | Not available |
| Diploma in Wood Technology | 3 years | 75 | AICTE | Not available |
| After 10th Diploma | Not available | Not available | Not available | Not available |
Total intake across the three named specialisations is 225 seats (75 each). The After 10th Diploma entry is a category label rather than a separate specialisation, so no additional seats are counted against it.
Diploma in Design and Drafting Technology
This three-year programme builds competence in engineering drawing conventions, computer-aided drafting and the preparation of technical blueprints. Graduates typically work in drafting and design offices attached to manufacturing units, construction firms and maintenance workshops, where accurate drawings and revisions are central to production.
Diploma in Machine Tool Technology
A workshop-intensive programme covering lathe operations, milling, CNC machining and precision fitting. The trade skills developed here are relevant to tool rooms, production shops and maintenance departments in manufacturing and engineering establishments.
Diploma in Wood Technology
This specialisation deals with timber processing, joinery, furniture production and wood-based composite manufacturing. Career paths usually lead to furniture and joinery industries, sawmills, plywood and composite units, and interior fit-out projects.
After 10th Diploma
The After 10th Diploma is the entry route for candidates who have completed Class 10 and wish to pursue diploma-level engineering study. At this centre, the named specialisations listed above fall under this route. Separate duration, seat or fee details for this generic entry are not available in the provided data.
3 EME Centre, Bhopal Admission Process 2026
Admission to the diploma programmes at 3 EME Centre, Bhopal is entrance-based. Candidates must appear for the prescribed entrance examination and secure a valid score before a seat can be allotted. The reference information confirms the entrance-based mode but does not publish a step-by-step admission schedule for 2026. The general sequence for AICTE-approved diploma admissions is outlined below; candidates should confirm the exact steps and dates with the institute.
- Appear for the entrance examination prescribed for diploma-level engineering admission and obtain a valid score.
- Register for the relevant counselling process through which diploma seats are allotted, as specified in the institute's admission notification.
- Complete the institute-level application with personal, academic and category details, attaching the entrance scorecard.
- Attend document verification at the centre in Bairagarh with original certificates and self-attested copies.
- Confirm seat acceptance and pay the prescribed fee within the window mentioned in the allotment letter.
Specific admission dates for 2026 are not available in the provided data. Candidates should check the official notification before planning their application.
3 EME Centre, Bhopal Accepted Entrance Exams and Selection Criteria
Selection at the centre is entrance-driven. Class 10 marks alone are not sufficient; candidates need a valid score in the entrance examination prescribed for diploma admissions, followed by participation in the counselling round through which seats are allotted. The reference information confirms the entrance-based mode but does not name a specific test. Applicants should confirm the accepted examination for the current cycle with the institute before registering.
- A valid entrance examination score is mandatory for admission.
- Seat allotment is based on entrance performance and category, as per the applicable counselling rules.
- Scorecard and allotment letter must be produced in original at the time of reporting.
- Selection is subject to fulfilment of eligibility conditions and successful document verification.
3 EME Centre, Bhopal Eligibility Criteria
Eligibility for these programmes follows the After 10th diploma route, so the qualifying examination is Class 10 rather than Class 12. The reference information confirms the entry level and the entrance requirement but does not publish subject-wise or percentage-wise conditions. Candidates should verify the exact requirements for the current cycle through the official admission notification.
- Completion of Class 10 (matriculation) from a recognised board is the base qualification for the After 10th Diploma programmes.
- A valid score in the prescribed entrance examination for diploma admission is required.
- Candidates must satisfy any category, domicile or age conditions specified in the applicable admission rules for the relevant year.
- Subject-specific requirements, if any, will be stated in the institute's admission notification and should be checked before applying.
3 EME Centre, Bhopal Documents Required for Admission
Document verification is a standard part of the admission process, and originals are checked against submitted copies. The exact list of documents is not published in the provided data; the checklist below covers the documents usually required for diploma admissions. Candidates should confirm the final list with the institute.
- Class 10 marksheet and pass certificate (original and copies)
- Entrance examination scorecard and counselling allotment letter
- Transfer certificate from the last institution attended
- Migration certificate, where applicable
- Caste or category certificate in the prescribed format, if claiming reservation
- Domicile certificate, if required under the applicable admission rules
- Government-issued photo identity proof (Aadhaar, passport or equivalent)
- Recent passport-size photographs matching the application
- Medical fitness certificate, if specified in the admission notice
3 EME Centre, Bhopal Placements and Career Opportunities
Verified placement statistics — average package, highest package, placement percentage or recruiter list — are not available in the provided data for this centre. Candidates should not rely on unverified salary claims circulating online and should check placement-related information directly with the institute.
In general, diploma holders in drafting, machine tool and wood technology trades enter a skills-driven job market where practical workshop competence matters more than campus recruitment branding. Typical employment areas include manufacturing units, tool rooms, furniture and joinery industries, construction drafting offices, and maintenance departments of public sector and engineering establishments. Many diploma holders also pursue lateral entry into degree engineering programmes or apprenticeships under the National Apprenticeship Training Scheme. Any recruitment into defence technical trades is governed by that organisation's own selection examinations and is not guaranteed by admission to this centre.
3 EME Centre, Bhopal Scholarships and Financial Assistance
Institute-specific scholarship details for 3 EME Centre, Bhopal are not available in the provided data. Financial support for diploma students in Madhya Pradesh generally flows through government channels rather than institute endowments. Eligible candidates can explore the Central Sector Scheme of Scholarships, state merit-cum-means schemes administered through the Madhya Pradesh scholarship portal, post-matric scholarships for diploma-level study, and reserved-category fee concessions where the applicable rules provide for them.
Applications for these schemes are usually made online through the National Scholarship Portal or the state portal and typically require income certificates, caste certificates and bank account linkage. Deadlines generally fall early in the academic year, so applicants should prepare the paperwork alongside the admission process. Candidates should confirm with the institute whether any centre-level assistance is available.
3 EME Centre, Bhopal Campus and Facilities
Detailed information on campus infrastructure and facilities at 3 EME Centre, Bhopal is not available in the provided data. Candidates should check the facilities relevant to their chosen specialisation — workshops, drafting studios, machine tool labs and library access — directly with the institute during the admission process or campus visit.
3 EME Centre, Bhopal Location and Contact Details
3 EME Centre is located at Bairagarh, Bhopal, Madhya Pradesh. The full address recorded in the reference information is given below. A website address is not available in the provided data.
| Address | 3 EME CENTRE, Bairagarh, Bhopal, Madhya Pradesh |
|---|---|
| City | Bhopal |
| State | Madhya Pradesh |
| Website | Not available |
Compare Other Listed Universities
Other institutes listed on this page.

