Central Tool Room and Training Centre College, Khurda Overview
Central Tool Room and Training Centre College, Khordha is a government-run technical institute located in the Chandaka Industrial Area of Khurda district, Odisha. Established in 1991, it operates as part of the central government's tool room and training centre network, which focuses on skill-intensive manufacturing education rather than conventional degree programmes. This makes it a distinct option among technical institutions in the state: the curriculum is built around shop-floor practice, precision machining, die and mould work, and automated systems.
The institute offers four listed programmes in the engineering stream, all at the diploma level and delivered in full-time mode. These include diplomas in Mechatronics Engineering, Tool and Die Engineering, and Automation and Robotics, along with a generic After 10th Diploma listing. The combined sanctioned intake across the listed programmes is 300 seats. All listed courses carry All India Council for Technical Education (AICTE) approval. The institute is not UGC-approved, so applicants should understand that credentials follow the AICTE diploma route rather than a university-affiliated degree pathway.
Given Odisha's manufacturing, metals and auto-component base around Khurda and Bhubaneswar, diploma holders in these trades are in steady demand for technician and supervisory roles. Students who prefer hands-on training over lecture-heavy study are likely to find the institute's orientation well suited to their goals.
Central Tool Room and Training Centre College, Khurda Key Highlights
| Particulars | Details |
|---|---|
| Institute | Central Tool Room and Training Centre College, Khordha |
| Institute type | College |
| Ownership | Public/Government |
| City | Khurda |
| State | Orissa |
| Full address | B-36, Chandaka Industrial Area Po KIIt Campus |
| Streams | Engineering |
| Courses offered | Diploma in Mechatronics Engineering, Diploma in Tool and Die Engineering, Diploma in Automation and Robotics, After 10th Diploma |
| Total seats (listed programmes) | 300 |
| Approvals & recognition | AICTE |
| UGC approved | No |
| Established year | 1991 |
| Official website | www.cttc.gov.in |
| Listing ID | 97843 |
Courses Offered at Central Tool Room and Training Centre College, Khordha
Four programmes are listed, all full-time diplomas at the after-10th level. Three have confirmed seat counts and durations; the fourth, the generic After 10th Diploma, is listed without a specified intake or duration in the available data. The table below reflects the sanctioned figures as published.
| Course | Duration | Seats | Approval |
|---|---|---|---|
| Diploma in Mechatronics Engineering | 3 years | 120 | AICTE |
| Diploma in Tool and Die Engineering | 4 years | 120 | AICTE |
| Diploma in Automation and Robotics | 3 years | 60 | AICTE |
| After 10th Diploma | Not specified | Not specified | Not specified |
The Tool and Die Engineering diploma runs four years, a year longer than the mechatronics and robotics programmes, reflecting the depth of die design, mould making and precision machining involved. Mechatronics, with the largest single intake at 120, combines mechanical systems with electronics and control. Automation and Robotics, at 60 seats, is the most specialised of the three named programmes. Fees for none of the courses are published in the available data; applicants should request the latest fee circular from the institute or check the prospectus on the official website.
Central Tool Room and Training Centre College, Khurda Admission Process 2026
Admission is merit-based. The institute considers applications from candidates who meet the eligibility criteria, and the process runs through its own application channel rather than a centralised state counselling portal. Students applying for the 2026 session should first confirm the course they want, then check the institute's official communication for the current application window.
- Submit the application online for the preferred diploma course through the institute's admission channel.
- Applications are assessed on merit, and candidates must meet the eligibility criteria for the chosen programme.
- Shortlisted candidates are expected to complete document verification, typically in person, before seat confirmation.
- Keep original certificates ready for physical verification alongside self-attested copies.
- Confirm the fee payment schedule and reporting deadline directly with the institute once a seat is offered.
Central Tool Room and Training Centre College, Khurda Accepted Entrance Exams and Selection Criteria
No entrance examination is listed for admission to the diploma programmes. Selection is merit-based, with the institute evaluating applications against the eligibility requirements rather than a competitive test score. This is standard for AICTE-approved diploma courses at the after-10th level, where Class 10 board performance usually carries the weight.
- No national, state or university-level entrance exam is specified for the diploma programmes.
- Selection is merit-based, assessed on the candidate's qualifying examination record.
- Class 10 board results form the primary academic benchmark for after-10th diploma admission.
- Applicants should submit mark sheets and any supporting documents as directed by the institute's admission office.
- No separate counselling scorecard requirement is noted; the institute's own process governs seat allocation.
Central Tool Room and Training Centre College, Khurda Eligibility Criteria
The eligibility standard is straightforward. For the after-10th diploma programmes, a candidate must have passed the Class 10 examination from a recognised board. No subject-specific percentage or stream requirement is stated in the published criteria.
- Passed Class 10 from a recognised board for all After 10th Diploma programmes.
- Applies to the Diploma in Mechatronics Engineering, Diploma in Tool and Die Engineering, Diploma in Automation and Robotics and the generic After 10th Diploma.
- No additional entrance test score is required as an eligibility condition.
- Candidates should confirm any course-specific conditions with the admissions office before applying, since the published criteria do not list subject-wise requirements.
Central Tool Room and Training Centre College, Khurda Documents Required for Admission
The institute's published admission criteria do not list a separate document checklist. Students should treat the following as the standard set for diploma admission and confirm the final list with the admissions office before reporting.
- Class 10 mark sheet and pass certificate from a recognised board.
- Class 10 board examination admit card, where available.
- Transfer certificate and conduct certificate from the last institution attended.
- Category certificate (SC, ST, OBC or EWS), if applying under a reserved category.
- Income certificate, if applying for a scholarship or fee concession.
- Recent passport-size photographs.
- Aadhaar card or another government-issued photo identity proof.
- Domicile or residence proof, where required by the institute.
Carry originals for verification along with self-attested photocopies of each document.
Central Tool Room and Training Centre College, Khurda Placements and Career Opportunities
The career picture for diploma holders in tool and die, mechatronics and automation is shaped by the industries around Khurda and Bhubaneswar. Manufacturing units, auto-component suppliers, precision engineering firms and the state's growing electronics and metals clusters typically recruit diploma technicians into roles such as tool room machinist, die maintenance technician, CNC operator, automation support engineer and mechatronics service technician. Diploma holders in these trades often begin on the shop floor and move into supervisory or design-support roles with experience. Many also pursue lateral entry into degree programmes later.
The institute has been rated 5 on placements in student reviews, though specific placement statistics such as average package, highest package and placement rate are not available in the provided data. Students should check with the institute's placement cell for current recruitment details.
Central Tool Room and Training Centre College, Khurda Scholarships and Financial Assistance
Government-funded technical institutes in Odisha typically give students access to the state's post-matric scholarship schemes, which cover SC, ST, OBC and economically weaker section candidates. The Odisha government's scholarship portal handles these applications, and eligibility usually depends on family income and category. Apply early in the academic year, as disbursement is tied to document verification.
Central schemes are also worth checking. The Central Sector Scheme of Scholarship for College and University Students, and the AICTE's own scholarship and tuition-fee waiver schemes for diploma students, are commonly available routes. The institute has not published a separate institutional scholarship list. Applicants should confirm the current options with the admissions office and track deadlines on the National Scholarship Portal.
Central Tool Room and Training Centre College, Khurda Campus and Infrastructure Facilities
The institute provides a range of facilities to support technical training and student life. According to the available data, the campus includes an auditorium, boys and girls hostels, a cafeteria, a gym, hospital and medical facilities, laboratories, a library, a sports complex and Wi-Fi connectivity. The institute operates three hostels with a combined capacity of 308 students.
Student reviews rate the institute 4.4 on infrastructure and 4.3 on campus life, suggesting a well-maintained environment for hands-on learning. The laboratories and workshops are particularly relevant for diploma programmes in tool and die, mechatronics and automation, where practical exposure is central to the curriculum.
Central Tool Room and Training Centre College, Khurda Location and Contact Details
The institute is located at B-36, Chandaka Industrial Area, PO KIIT Campus, in Khurda district, Odisha. The official website is www.cttc.gov.in.
Chandaka Industrial Area sits on the north-western edge of Bhubaneswar, close to the KIIT campus and within reach of the city's main road network. Students travelling from Bhubaneswar's railway station or bus terminal can reach the area by local bus or auto-rickshaw. For directions, admission queries and current fee details, the official website and the institute's admissions office remain the most reliable sources.
Compare Other Listed Universities
Other institutes listed on this page.

